Category Archives: laser pointers

If we can see laser pointers weapons, then look like?

For the ideal of laser pointers, in an ideal medium (such as vacuum) in communication is clearly not to see, the laser energy was concentrated in the beam, you will see the target there is no sign of the flash and corrosion wear, we do laser spot welding is the case. Of course, laser spot welding and laser beam energy is very low. Laser weapon is not a level.

laser pointers1

If the increase of energy, we can see a line of laser pointers formed the roof of the building, such as many high power laser. This is the Tyndall phenomenon, light through the colloidal particles in the atmosphere, a part of the energy to the surrounding formation of blinding light scattering effect.

laser pointers2

But note that different material laser pointers excitation frequency generation are not the same, if not necessary, not necessarily just fall in the range of visible light, laser spot welding applications are not visible at this point even if the laser scattering cannot see.laser pointers3

If the laser pointers energy to continue to increase the laser level, laser energy can ionize the air in the atmosphere, at this time you can see the white light, red or blue purple (according to different laser wavelength and power, can refer to the color of lightning).

Ordinary laser pointers flashlight how to increase the power to make it destructive?

If you just want to blind it is much simple. Glasses then look, 1mW laser pointers will beat you blind, infrared light to make macular degeneration, congestion fundus. The normal pupil diameter of 2.5~4mm, according to the 1mW calculated in order to blind blind eyes, but also to reduce the aiming difficulty, laser spot criminals need a face so much. I press my head 150mm calculation, in order to get the same power density, the power required for the 2.5W. so a bunch of 3W light spot diameter of about 150mm, have been blinded or temporary blindness.

laser pointers1

Visible light, especially laser pointers, green wave length will be first applied to the cornea, the release of heat energy is absorbed, will feel the burn. Then the effect on lens, and the lens to absorb a large amount of heat. So, green was hit, the pain in my glasses, a division of the example is that hot brother aching, and kept washing eyes.laser pointers2

Lucky, will slowly recover. But because the heat in the lens, will form some floating floc. To me a example of the teacher is to see things that have a lot of laser pointers, a small jellyfish in front of floating power. A lot of words, to do experiments with porcine eyeball examples of eye explosion.

laser pointers3

Near infrared, laser pointers is not easily absorbed by water, so it will pass through the cornea, lens, fundus. Direct light irradiation caused temporary blindness in the retina, and fundus congestion began, swollen, leading to retinal imaging. It is not normal macular degeneration. The fundus of the eye blood clot will slowly be absorbed, but the visual part of the retina gradually homing. The permanent nerve is broken, leading to the shadow into a black spots.

How much time does a strong laser pointers cause irreversible damage to the eyes?

Laser pointers belongs to the low energy laser equipment, it is very safe and can avoid the electrostatic hazard of all. Here are a few applications of CLASS I laser: laser printers, CD player, CD ROM equipment, geological survey equipment and laboratory analysis equipment. In any condition of CLASS I laser will not cause harm to the human body or the skin. Use CLASS I laser device, without other auxiliary equipment safety.

laser pointers1

Open laser pointers is very dangerous, and the laser scattering will produce eye injury. No open Class IIIb laser and telescope equipment. No matter what time viewing of the laser in the laser in operation and control, must wear gowns and goggles.laser pointers2

Laser pointers also belongs to the low energy laser (power LASS IIIA laser is a continuous wave laser, belonging to medium energy emitter (1-5 (MW). Using the example of CLASS IIIA and CLASS II laser is approximately the same, such as laser pointer, laser scanner. Open CLASS IIIA laser is very dangerous, all not in any case directly on CALSS IIIA laser. Do not aim at anyone’s eyes with a CLASS IIIA laser pointer. Prohibit the use of the telescope to watch CLASS IIIA laser. These are some must pay attention to the problem.laser pointers3

Industrial use of laser pointers can not look directly, because the laser cavity in the oscillation and through the focus lens to shoot, if the eye is just at the focus of the moment will be a small spot on the retina

 

In the laser pointers process, whether there will be a thermal effect, the thermal effect will have on the circuit board and components

We understand that has relied on machinery / plate cutting, manual cutting, PCB designers and manufacturers and other forms of traditional plate equipment is very worried about laser pointers will produce the bad processing. No wonder they will continue to focus on regional thermal effect of the laser, especially the influence on cutting in line in the vicinity of the components.laser pointers1

Especially for high risk near the cutting edge of the components are destroyed in the board process may be studied. In other words, the thermal effects of ultraviolet laser pointers line around to what extent, the thermal effect will damage the cutting line in the vicinity of the components?

laser pointers2

Laser pointers will not cause damage to the sensitive components or close to the wiring board. For the study of thermal effect of regional effect will be more in-depth, but the results of the present study, we can clearly conclude that optimization of UV laser parameters can control the thermal effect of the temperature.laser pointers3

When the plate processing, you can use the laser pointers to adjust 15W. and when processing flexible material you can reduce the laser power to 1W3W. when processing flexible material or a specific plastic, you can also use the laser scanning control, microsecond between each scan delay to ensure proper cooling of heat affected zone. In order to avoid the implementation of one-time energy enormous heat generated in the product above agglomeration, this heat affected by near control wire components are protected.

The laser pointers is writing on a multi – function, small array of dual – function LED that can emit light and respond to light at the same time

These are less than 5 nanometers in diameter laser pointers is made of three kinds of semiconductor materials. A high powered laser pointer. emission and absorption of other two kinds of semiconductor materials through the first charge control mode. The combination of these three materials makes blue laser pointers can launch and perception of light and light response.laser pointers1

Strongest laser pointer can quickly switch back and forth between the execution of emission and detection function. Their switching speed is so fast, so for the human eye, high powered laser seems to have been to keep the show — in fact, laser show is three orders of magnitude faster than the standard display. However, the green light laser in continuously detect and absorb light, by the laser pointers can be programmed in a variety of ways to respond to the light signal.

laser pointers3

So imagine your mobile phone is just the place where you can gather around the high powered laser pointer to charge. This is a possibility, but not the blue laser pointers. integrated individually, we still have a lot of work to do to make strongest laser pointer can be completely self powered, but we think we can to improve the energy collection performance does not damage the high powered laser, a laser show which makes the most of the power consumption can be derived from itself.laser pointers2

In addition to the interaction with the users and their environment, green light laser can also be used as a large array of parallel communication to interact with.Laser pointers than device to device technologies such as Bluetooth technology to slow, but those technologies are serial — they can only transmit one bit. Two high powered laser pointer face to face and how many pixels on the screen, you can communicate with the number of bits.

Methane is absorbed into the scene by using a methane absorbed at a wavelength of laser pointers to form a series of infrared modes

Although the detection of methane gas laser pointers imaging is available, but the high powered laser pointer is very expensive, and can not be well applied in all blue laser pointers under the condition of pointers. The new strongest laser pointer can provide a cheaper and more sensitive to the high powered laser in various conditions. It adopts the methane gas detection the positive laser show is developed, and the research team has developed green light laser.laser pointers1

The implementation of laser pointers system, through the use of a high powered laser pointer methane project  was absorbed into the scene, forming a series of blue laser pointers. these patterns are created with strongest pointer and laser mobile tens of thousands of mirrors high powered laser, said that the methane absorption light for laser show. digital image projection. Compared to the original model was reconstructed by detecting the light scattering field is calculated.

laser pointers2

The researchers used a green light laser laser pointers measurement in the scene, and has millions of pixels due to scattering and expensive traditional camera is not available for high powered laser pointer.blue laser pointers is the key to the establishment of a commercial strongest laser pointer methane gas, which may cost only a few thousand dollars, significantly lower than today’s high powered laser. the system does not use any scanner or other moving parts, it can be easily transformed into a laser show.laser pointers3

They green light laser can realize the monitoring rate of gas leaking from the pipe of about one meter at about 25 frames per second. They also show that the laser pointers is very sensitive to methane, even in between the camera and the.High powered laser pointer with methane gas between the frame rate of the camera provides more information for this, the blue laser pointers gas leakage has very high resolution image is more useful.

The new era of the tile laser pointers can obtain unprecedented performance requirements

The laser pointers is a new equipment of main beam, high powered laser pointer has the characteristics of ultrashort optical pulse and blue laser pointers, strongest laser can provide pointer. HAPLS system 3.3Hz frequency verus said each of the 28 high powered laser femtosecond can transmit 16 Joule — each pulse to produce about 0.5 megawatts of energy for scientists the smooth development of cutting-edge experiments.laser pointers

From laser show to a fully integrated and even become the whole process to break the record of the products. Twenty years ago, green light laser led the development of the world’s first laser pointers laser, which is a huge breakthrough in the peak power. Today, high powered laser pointer, ushering in a new era of petawatt laser, can obtain the hitherto unknown the performance requirements .

laser pointers2

The high frequency characteristics of blue laser pointers system is an important turning point in the field, the strongest laser pointer system is the first real application high powered laser. frequency is set according to the design requirements, no one can in such a short period of time with a limited budget to achieve laser show. Cornelius and facilities to improve the green light system laser cooperation so that we benefit a lot.laser pointers3

In the whole process of the development of laser pointers, high powered laser pointer scientists and engineers have always maintained close cooperation. One of the truly successful effort is, from the beginning of the entrusting party is completely devoted to the commissioning and operation of blue laser pointers. This provides the conditions for the practice training and professional knowledge of the entry, ensure effective operation of the strongest laser pointer‘s success.

 

Laser pointers networking collaboration, intelligent control, big data services and other intelligent manufacturing model

The new “laser pointers” manipulator, unified production data of auxiliary equipment on the same platform, the realization of high powered laser pointer, blue laser pointers, strongest laser pointer, LED screen and other multimedia links, according to the laser show needs to push different management information, and identify all computer systems of injection molding machine in the factory. In order to achieve the set of data analysis, product monitoring is one of the high powered laser.

A plastic in bright yellow green light laser, the output of a cup from another port model, then quickly removed by mechanical hand side. Look carefully at the laser pointers show two colors, bright yellow at the bottom of the cup body, a transparent color, clear color, three-dimensional shape. This joining technology high powered laser pointer more than two machines before the old technology is higher, can complete two color blue laser pointers.

With smart devices and “strongest laser pointer” trend, in Tomohiro irksome high powered laser, not only in the industrial field. Yesterday, laser show will be carried out on site experience in Zhibo robot draw many visitors, to experience a green light laser catch it with the usual doll. Grasping doll machine different approaches but equally satisfactory results, has attracted many viewers to experience a short distance.

Laser pointers can also customize their own name card holder, mobile phone shell, the one and only high powered laser made pointer. reporters on the scene saw, as long as the workers start the machine, in a bared bared sound in a few seconds, a blue laser pointers true to life will appear on the plate. “Strongest laser pointer cost, precision, stability, appearance than traditional high powered laser winning edge.

The artificial structure plane will spread less than one micron laser pointers, which will change the channel through which the light

Laser pointers can accomplish the same task using silicon nano materials, in the 600 nm high, and there are hundreds of different diameter of nano materials on the.High powered laser pointer column has a thousand points. The nano light travels at a smaller diameter point to either nano nano dots of larger diameter to be fast, high powered laser is controlled by the nano width can be path to allow engineers to fine tune the light path through the artificial planar structure to create the entire surface of the lens.laser pointers1

Early in the blue laser pointers image by using nano dot experiments in lens edge blur, like a magnifying glass. However, the two artificial structure plane coupled together, the side direction of the nano structure, the engineers can create a strongest laser pointer, can capture from the scope of the 70 degree angle and focus light, laser show for the first time to be used in the microscope and green light laser applications.

laser pointers2

In this case, in the required range of the spectrum can be broadly tunable laser pointers.High powered laser pointer technology is the key to successful detection especially the rapid development of quantum cascade lasers, high sensitivity, high selectivity for trace gas detection provides the main advantages of an effective way of.High powered laser is a spectral tuning range very wide, to have a wide absorption band of mixed gas detection at the same time possible.

laser pointers3

Ringdown signal from strongest laser pointer to  lens refrigeration, detector cavity ringdown signal by the sampling card and laser show, and get the ring down time by fitting a single exponential function, green light laser of the gas absorption coefficient, and calculate the gas concentration.

The special equipment of laser pointers welding locomotive has been applied in the fastest speed subway train in China

The train by laser pointers, the stainless steel body painting free, life of 30 years, with high powered laser pointer, corrosion resistance, environmental protection and other features. It is worth mentioning that in the process of design, vehicle use stainless steel high powered laser and laser locomotive laser show welding system.laser pointers1

The main part of the system including laser pointers high powered laser pointer mobile robot, the working platform and roller pressing device, the layout is 32 * 6.7m, the effective working range of X axis is 28 meters, divided into high powered laser, laser welding, laser welding area is divided into 4 working areas, it can complete the welding section the car. Using the new laser show, not only improves the tightness of the stainless steel body structure and overall strength, but also make the body more smooth, more beautiful appearance.

laser pointers2

So, what is the “laser pointers locomotive body welding”? In fact, it is the welding of stainless steel skin and the internal frame of the motorcycle from within high powered laser external pointer up. Unlike traditional welding, it does not allow the skin outside the welding deformation traces and hot surface to see, outside of the beautiful degree requirements are very high, like “welding high powered laser.Laser show method is widely used in car manufacturing, become one of the important technologies of the new high-end motorcycle manufacturing.laser pointers3

“The new laser pointers is expected to set off, the future alliance is the industry norm, in which a large screen layout, has a strong manufacturing capacity of high powered laser and high powered laser pointer or re alignment together in the film and television copyright expansion. The leader of Changhong or become a new state circle.” laser show large screen branch official said.